sreffett
November 29th, 2005, 03:09 PM
FOR SALE! BEAUTIFUL ORANGE 1989 PONTIAC FIREBIRD
Here is a list of details on the car.
Engine:
400 C.I. small block
Motown block machined by Gaerte Engines
4340 crank machined, lightened, and knife edged by Accucrank 3.75" stroke
MGP aluminum 6.0" rods
Custom Diamond Pistons 4.125"
Total Seal rings
Michigan 77 bearings
Balanced by Gaerte Engines
Canton aluminum pro pan
Cam Motion custom cam
Roller cam bearings
Comp belt drive
Fel-Pro gaskets
Isky Red Zone lifters
Gaerte Engines push rods
Dart 220 race series heads ported by Steve Schmidt racing
Dart intake also ported by Steve Schmidt racing
REV 5/16 valves
Isky valve springs
Manley titanium locks and retainers
T&D shaft rockers
Aluminum sheet metal valve covers
Peterson external oil/vacuum pump
Tilton starter
Powermaster alternator
Pro-Systems carb
MSD pro billet dist.
MSD digital 6 plus
CSI electric water pump
S&W motor plate
Stahl 2- 21/8" stepped race headers with dynatech race mufflers
Aeromotive fuel system
Chassis:
Chassis built by Vernon House of Pro Fabrication.
Has custom chrome moly cage that can easily be upgraded to 25.1 cert. Cage was certified Oct. 2003
Custom Ladder bar cross member
S&W adjustable ladder bars
Full chrome moly front suspension with adjustable A-arms and pinto rack with bump steer kit.
Koni adjustable front drag struts with coil overs
Moser 9" with thru bolt aluminum center section, light weight steel spool, 4.86 gear, and 40 spline axles that are gun drilled and have lightened flanges
Willwood disc brakes on all 4 corners with steel braided lines
QA1 rear shocks
Holley battery
All new carpet and headliner.......Have new door panels, but not installed
Bogart force 5 wheels with M/T rubber 28x10.5 in rear
Kirkey seat
Autometer gauges
M&R belts and window net
Trans:
Coan glide with 1.90 first gear and full roller
Coan 8" converter
CSI flexplate shield
Coan trans shield
4" aluminum drive shaft
This car is in perfect shape and has less than 20 passes on it. I
have a lot of extra parts to go with the car
I am asking $16,000 turn key. The car is insuered for and appraised for over $43,000. Car has clean title and can be financed through Wells Fargo. My loss is your gain. Contact me for more info Shane 317-409-9387 or leave message 810-735-9812. Car is located in Indiana.
Pics now available http://hometown.aol.com/birdondfi/myhomepage/photo.html
Here is a list of details on the car.
Engine:
400 C.I. small block
Motown block machined by Gaerte Engines
4340 crank machined, lightened, and knife edged by Accucrank 3.75" stroke
MGP aluminum 6.0" rods
Custom Diamond Pistons 4.125"
Total Seal rings
Michigan 77 bearings
Balanced by Gaerte Engines
Canton aluminum pro pan
Cam Motion custom cam
Roller cam bearings
Comp belt drive
Fel-Pro gaskets
Isky Red Zone lifters
Gaerte Engines push rods
Dart 220 race series heads ported by Steve Schmidt racing
Dart intake also ported by Steve Schmidt racing
REV 5/16 valves
Isky valve springs
Manley titanium locks and retainers
T&D shaft rockers
Aluminum sheet metal valve covers
Peterson external oil/vacuum pump
Tilton starter
Powermaster alternator
Pro-Systems carb
MSD pro billet dist.
MSD digital 6 plus
CSI electric water pump
S&W motor plate
Stahl 2- 21/8" stepped race headers with dynatech race mufflers
Aeromotive fuel system
Chassis:
Chassis built by Vernon House of Pro Fabrication.
Has custom chrome moly cage that can easily be upgraded to 25.1 cert. Cage was certified Oct. 2003
Custom Ladder bar cross member
S&W adjustable ladder bars
Full chrome moly front suspension with adjustable A-arms and pinto rack with bump steer kit.
Koni adjustable front drag struts with coil overs
Moser 9" with thru bolt aluminum center section, light weight steel spool, 4.86 gear, and 40 spline axles that are gun drilled and have lightened flanges
Willwood disc brakes on all 4 corners with steel braided lines
QA1 rear shocks
Holley battery
All new carpet and headliner.......Have new door panels, but not installed
Bogart force 5 wheels with M/T rubber 28x10.5 in rear
Kirkey seat
Autometer gauges
M&R belts and window net
Trans:
Coan glide with 1.90 first gear and full roller
Coan 8" converter
CSI flexplate shield
Coan trans shield
4" aluminum drive shaft
This car is in perfect shape and has less than 20 passes on it. I
have a lot of extra parts to go with the car
I am asking $16,000 turn key. The car is insuered for and appraised for over $43,000. Car has clean title and can be financed through Wells Fargo. My loss is your gain. Contact me for more info Shane 317-409-9387 or leave message 810-735-9812. Car is located in Indiana.
Pics now available http://hometown.aol.com/birdondfi/myhomepage/photo.html