PDA

View Full Version : King of the dyno

Don Bailey
October 12th, 2005, 02:43 PM
Top 10 dyno kings for each catagory.

Naturally Aspirated

Turbo

Blower

Nitrous
Ben
October 12th, 2005, 02:49 PM
Mr. Powell made 865 RWHP on a 300 shot. 11:1 408 with a street solid-roller, Powerglide, 28W's, and the loosest Neal Chance converter of all time.
JZ'sTA
October 12th, 2005, 05:56 PM
Did a buddy's car last month that made 485RWHP NA stock cubes, daily driver.
11.85:1 Compression. Ported LS6 heads, 234/238 cam, M6Z06
Should be in the top 10 for a little while.
LOnSLO
October 12th, 2005, 07:03 PM
Retuned my girly combo last week for 579rwhp N/A. Hydraulic cam, 12:1 408. Shooting for 750rwhp N/A next year. Fugged up a lot of stuff on this motor.:violin[1]
JZ'sTA
October 12th, 2005, 10:00 PM
M6 car? That is Huge HP if your in a Auto.
LOnSLO
October 13th, 2005, 02:00 AM
M6 car? That is Huge HP if your in a Auto.
M6 car. It was through a 9" with big gears and tires though, so I was content for a week or two. The sad part is, it's tuned in SD open loop, and I have no clue what I'm doing.
JZ'sTA
October 13th, 2005, 03:19 AM
M6 car. It was through a 9" with big gears and tires though, so I was content for a week or two. The sad part is, it's tuned in SD open loop, and I have no clue what I'm doing.


Where do you live maybe I can offer some help.
bigbadblackws6
October 13th, 2005, 04:36 AM
480rwhp with the vortech g-trim

doesnt mean **** if you cant put it all to work tho......... aint JZ?

cant wait for the new parts to get in.

steve
Cary@ETPerformance
October 13th, 2005, 05:38 AM
Hardcore Racing,

over 1800 supercharged 400inch. if they make it down the track in orlando this weekend, you will see the fastest LS1 pass. if they don't you wont.
427
October 14th, 2005, 01:08 PM
LS1 on engine dyno. 352ci
1697hp@ 7500rpm
AFR cathedral port heads
6.0 iron block
GM performance parts intake
twin 80mm turbo's
Presicion turbo intercooler
solid roller
Jesel lifters/rockers
GM performance timing chain


Kurt
Outlaw5.0
October 15th, 2005, 05:31 AM
Top 10 dyno kings for each catagory.

Naturally Aspirated

Turbo

Blower

NitrousPeak or average hp?. Can you guess that I run a dynamometer for a living?.
racer7088
October 22nd, 2005, 01:41 AM
Well at SAM we made around 750 RWHP on our school's project car that has been in Hotrod and Car Craft and so many other mags. It's all motor and has ported LS6 heads. I think we have made more NA RWHP by far at this point still using ported OEM heads and on all-motor.
Ben
October 24th, 2005, 04:17 PM
I heard that engine will be back with some C5R heads on it and will make 1,000FWHP.
Mr Powell
October 29th, 2005, 05:50 AM
http://www.vobra.org/pics/JoeDieselTruck.JPG
Brian Carner
October 29th, 2005, 01:27 PM
Good god - check out the torque at the wheels on that truck - talk about a stump puller! ::sheesh::
OZIGTO
March 3rd, 2006, 11:09 PM
http://i23.photobucket.com/albums/b376/GTBMad/Pic9.gif

Pump gas
allngn_c5
March 17th, 2008, 01:21 PM
stock bottom end, stock cubes (346), N/A 11.5 to 1 compression (roughly)
490 rwhp 445 rwtq
Chrs1313
June 19th, 2009, 06:25 PM
stock bottom end, stock cubes (346), N/A 11.5 to 1 compression (roughly)
490 rwhp 445 rwtq

trap speed seems really low for the rwhp number...is there a reason why